![](/images/new-backgrounds/1263695/263695141x1.webp)
6.5Tear-Off Function
The
It allows the paper to automatically advance to the tear position after printing.
When this function is turned on, the paper will be fed to the manual tear position after printing. The printer will feed back paper to the start print position when the next print job is sent.
If data is transmitted continuously from the computer, the
6.5.1Turning Tear ON/OFF
Tear can be turned to ON or OFF from the control panel. Default is OFF. Indications on the control panel are as follows:
| ||
LCD indication | "Tear OFF" | "Tear ON" |
6.5.2Tear-off when printing
If set, the
(The