Reference points
The reference points are described in the figure. The position of 2.5
mmfrom the left edge of the paper is the reference point. The left bottom is the reference point for the printed characters and bar codes. The concept of this reference point is common to such commands as ruled line and graphic.
Printing reference point
Printing reference point
2.5
Left edge of paper
Paper reference line
Printing reference point | Printing reference point |
| |
| Direction of paper feed |
3.3Ribbon
Size of ribbon:
Width of ribbon:
Use the inner diameter of 25.4 mm (1 in) for the ribbon paper core. The ribbon with inking surface rolled inward or outward can be used. The maximum outer diameter of the ribbon roll is 74 mm (2.9 in).
A single roll of ribbon (360 m) can be used for printing on about two rolls with an outer diameter of 203 mm (8 in).
