Citizen Systems PPU-231II manual Related Commands FS p

[Caution] • Because frequent writing in the non-volatile memory can destroy the memory, the writing command should be used less than 10 times a day.

•Just after the completion of the writing operation into the non- volatile memory, the printer hardware will be reset. Therefore, download characters, download bit images, and macro definition will be made undefined. The receiving buffer/printer buffer will be cleared, and each setting will go back to its default value. Then the status of dip switches will be checked once more.

•It may happen that the printer becomes BUSY during the process of writing data into the non-volatile memory in the execution of this command. When the printer becomes BUSY, it will stop receiving data. Therefore, sending data from the host (Including real time command) is prohibited.

[Related Commands] FS p

(xL + xH ⋅ 256) ⋅ 8dots = 512dots

(yL + yH ⋅ 256) ⋅ 8dots = 768dots

[Example] When xL =64, xH = 0, yL = 96, yH = 0

— 102 —