ESC n n
[Function] | Setting a remaining amount of printout |
|
[Code] | <1B>H<6E>H<n> |
|
[Range] | 0 n 255 (“n” in the 2nd byte denotes this command.) | |
[Outline] | This command sets the remaining amount of printing after | |
| detecting paper near end 1. n is set in cm. |
|
[Caution] | • If the paper near end (PNE) sensor is disabled, this command | |
| has no function. |
|
| • The set value and the remaining amount of printing are not | |
| cleared by the initialize command (ESC @). | |
| • If a value lower than the preset value is set during PNE | |
| detection, the printer may stop printing. |
|
| • The set value remains valid until the printer is restarted or the | |
| a new value is set. |
|
[Default] | n=150 (150 cm) |
|
[Sample Program] | LPRINT CHR$ (&H1B); “n”; CHR$ (100); ← | When setting the |
|
| remaining amount of |
|
| printing to 100 cm |
— 50 —
