ESC L
[Function] | Selecting PAGE MODE |
| |
[Code] | <1B>H<4C>H |
| |
[Outline] | Switches from STANDARD MODE to PAGE MODE. | ||
[Caution] | • This command is only effective if it entered at the beginning | ||
| of a line. |
| |
| • This command is not effective if it is entered when in PAGE | ||
| MODE. |
| |
| • STANDARD MODE is restored when printing specified by FF | ||
| is finished or when ESC S is issued. | ||
| • The character mapping start position will be the point specified | ||
| by ESC T in the print area specified by ESC W. | ||
| • The commands listed below, which have separate settings for | ||
| PAGE MODE and STANDARD MODE, are changed to the | ||
| settings for PAGE MODE use. | ||
| (1) | Spacing setting: | ESC SP |
| (2) | Line feed width setting: ESC 2, ESC 3 | |
| • The following commands are valid only in PAGE MODE. | ||
| (1) | ESC V Specifying/canceling | |
| (2) | ESC a Aligning the characters. | |
| (3) | ESC { Specifying/canceling the inverted characters. | |
| (4) | GS L Setting the left margin. | |
| (5) | G3S W Setting the print area width. | |
| • ESC @ restores STANDARD MODE. | ||
[See Also] | FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \ | ||
— 36 —
