GS B n
[Function] | Specifying/Canceling the black/white inverted printing | |
[Code] | <1D>H<42>H<n> | |
[Range] | 0 n | 255 |
[Outline] | This command specifies or cancels the black/white inverted | |
| printing. |
|
| • “n” is valid only for the lowest bit (n0). | |
| • Control by the lowest bit (n0) is shown as follows: | |
|
|
|
| n0 | Function |
0The black/white inverted printing is canceled.
1The black/white inverted printing is specified.
[Caution] | • Number “n” is only valid in the lowest bit. |
| • The black/white inversion works on internal and downloaded |
| characters. |
| • The black/white inversion works also on the right spacing of |
| characters defined by ESC SP. |
| • This command does not affect the bit image, downloaded bit |
| image, bar code, HRI characters, or the skip area specified by |
| HT, ESC $, or ESC \. |
| • This command does not affect the space between lines. |
| • Black/white inversion specification takes precedence over |
| underline specification. Underline printing specified is, |
| therefore, nullified if black/white inversion is specified; the |
| underline setting, however, remains unchanged. |
[Default] | n = 0 |
— 62 —
