GS ( A pL pH n m
[Function] | Execution of test printing | ||||
[Code] | <1D>H<28>H<41>H<pL><pH><n><m> | ||||
[Definition] | (pL+(pH ⋅ 256))=2 (pL=2, pH=0) | ||||
| 0 | n | 2, 48 | n | 50 |
| 1 | m | 3, 49 | m | 51 |
[Outline] | Specified test printing will be executed. | ||||
•pL, pH will specify the number of subsequent parameters by (pL+(pH ⋅ 256))bytes.
•n will specify the paper for test printing in the following table.
n
0, 48
1, 49 2, 50
Category of paper
Basic paper (Paper rolls)
Paper rolls
•m will specify the category of test printing in the following table.
m
1, 49
2, 50
3, 51
Category of test printing
Hexadecimal dump
Printer’s status printing
Rolling pattern printing
[Details] | • This command is only valid when processed at the head of a |
| line during the STANDARD MODE. |
| • The command will be ignored in PAGE MODE. |
| • During macro definition, if this command is processed, the |
| macro definition is suspended, and the command starts being |
| processed. |
| • Printer will reset its hard disk after finishing test printing. |
| Therefore, the printer makes download characters, bit map |
| images and macros undefined, clears the reception buffer/print |
| buffer, and returns the various settings to defaults. At this time, |
| the DIP switches are read again. |
| • Paper cutting is performed at the end of test printing. |
| • Printer will be BUSY when the processing of the command |
| starts. |
— 58 —
