(3) Status caused by an error (when n = 3 is specified)
Bit | Status | Hex. | Decimal | |
0 | Unused | 00 | 0 | |
1 | Unused | 02 | 2 | |
| No Black mark detection error occurred | 00 | 0 | |
2 | (only when “Black mark” is selected). | |||
|
| |||
A Black mark detection error occurred | 04 | 4 | ||
| ||||
| (only when “Black mark” is selected). | |||
|
|
| ||
3 | Auto cutter error not occurred | 00 | 0 | |
Auto cutter error occurred | 08 | 8 | ||
| ||||
4 | Unused | 10 | 16 | |
5 | Unrecoverable error not occurred | 00 | 0 | |
Unrecoverable error occurred | 20 | 32 | ||
| ||||
6 | Auto recovery error not occurred | 00 | 0 | |
Auto recovery error occurred | 40 | 64 | ||
| ||||
7 | Undefined | 00 | 0 |
Bit 3: If this error occurred because of a paper jam, for example, remove the cause of the error, and then DLE ENQ n (1 
n 
2) can be used to recover from the error. However, it is not possible to recover from any error due to a circuit problem (e.g., broken wire).
Bit 6: If a head overheat error is detected, the printing is stopped until the head temperature falls. At this time, bit 6 = “1”.
(4) Continuous paper detector status (When n = 4 is specified)
| Bit |
| Status | Hex. | Decimal |
|
| ||||
| 0 |
| Unused | 00 | 0 |
| 1 |
| Unused | 02 | 02 |
| 2 |
| Paper found by Paper | 00 | 0 |
|
| Paper not found by Paper | 04 | 4 | |
|
|
| |||
| 3 |
| Paper found by Paper | 00 | 0 |
|
| Paper not found by Paper | 08 | 8 | |
|
|
| |||
| 4 |
| Unused | 10 | 16 |
| 5 |
| Paper found by | 00 | 0 |
|
| Paper not found by | 20 | 32 | |
|
|
| |||
| 6 |
| Paper found by Presenter Sensor | 00 | 0 |
|
| Paper not found by Presenter Sensor | 40 | 64 | |
|
|
| |||
| 7 |
| Unused | 00 | 0 |
[See Also] | DLE ENQ, GS a, GS r |
|
| ||
— 12 —
