ESC T n
[Function] | Selecting the character printing direction in PAGE MODE | ||
[Code] | <1B>H<54>H<n> | ||
[Range] | 0 | n | 3 |
| 48 | n | 51 |
[Outline] | Selects the direction and start point of character printing in | |||
| PAGE MODE. |
|
| |
|
|
|
|
|
| n | Printing direction |
| Start point |
| 0, 48 | Left to right |
| Top left (“A” in the figure) |
| 1, 49 | Bottom to top |
| Bottom left (“B” in the figure) |
| 2, 50 | Right to left |
| Bottom right (“C” in the figure) |
| 3, 51 | Top to bottom |
| Top right (“D” in the figure) |
|
|
|
| Reference |
|
|
| < | |
|
|
| < | |
Paper Feed Direction
Print Area
[Caution] | • When STANDARD MODE is selected, this command only |
| executes the internal flagging of the printer without affecting |
| the printing in STANDARD MODE. |
| • The character mapping position will be the start point of the |
| print area specified by ESC W. |
| • The basic calculation pitch (x or y) used by the following |
| commands varies with the start point. |
| (1) If the start point is the top left or bottom right (The |
| characters are mapped in the direction perpendicular to |
| the paper feed), |
| • Commands using x: ESC SP, ESC S, ESC \ |
| • Commands using y: ESC 3, ESC J, GS $, GS \ |
| (2) If the start point is the top right or bottom left (The |
| characters are mapped in the paper feed direction), |
| • Commands using x: ESC 3, ESC J, GS $, GS \ |
| • Commands using y: ESC SP, ESC S, ESC \ |
[Default] | n = 0 |
[See Also] | ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \ |
— 40 —
