Citrix Systems 1.8 manual +Dugzduh,Qvwdoodwlrq, To install the Maxspeed MaxStation adapter

$SSHQGL[￿%￿￿￿￿&LWUL[￿'LUHFW,&$￿IRU￿0HWD)UDPH￿ ￿ ￿￿￿

+DUGZDUH￿,QVWDOODWLRQ

This section contains separate installation procedures for the Maxspeed and Stone Microsystems adapters.

You can install as many multi-VGA adapters as your system can contain, but they must all be from the same manufacturer.

ÃTo install the Maxspeed MaxStation adapter

Before installing, decide which base address to use with your multi-VGA adapter. The base address chosen must not conflict with other devices in your server. If you do not have a record of which address ranges are already being used, check your BIOS configuration software and system and expansion card documentation. Although the base address for the Maxspeed card is software configurable, check the jumper settings on existing expansion cards when you open the server to install the multi-VGA adapter.

∙Install the multi-VGA adapter(s) and connect the DirectICA stations according to the manufacturer’s documentation.

1RWH The serial port on each DirectICA station is reserved for use with a mouse.

ÃTo install the Stone Microsystems adapter

The Stone Microsystems adapter uses interrupt requests (IRQs) for the DirectICA station keyboards and serial devices. Before installing, decide which IRQs and base address to use with your multi-VGA adapter. The IRQs and base address chosen must not conflict with other devices in the server.

If you do not have a record of which IRQs and address ranges are already being used, check your BIOS configuration software and system and expansion card documentation. Check the jumper settings on existing expansion cards when you open the server to install the multi-VGA adapter.

1.Configure the base address using the jumper settings on the adapter. See the manufacturer’s documentation for instructions. Make a note of the address you use.

2.Install the multi-VGA adapter(s) and connect the DirectICA stations according to the manufacturer’s documentation.

1RWH The first serial port on each DirectICA station is reserved for use with a mouse only.