Citrix Systems 1.8 manual Rqiljxulqjluhfw,&$, QDEOLQJLUHFW,&$6WDWLRQV, To uninstall DirectICA

$SSHQGL[￿%￿￿￿￿&LWUL[￿'LUHFW,&$￿IRU￿0HWD)UDPH￿ ￿ ￿￿￿

ÃTo uninstall DirectICA

1.Make sure all users are logged off from DirectICA stations.

2.Log on using the local “Administrator” account.

3.Click the Start button, point to Settings, and then click Control Panel.

4.Double-click Add/Remove Programs to display the Add/Remove Programs dialog box.

5.Select Citrix DirectICA for MetaFrame and click Add/Remove.

6.Click Yes when the confirmation dialog box appears.

7.The DirectICA uninstall process begins. When it completes, click OK.

8.Click OK when the dialog box suggesting you reboot the server appears. This does not reboot the server.

9.Click OK to close the Add/Remove Programs dialog box.

10.Reboot the MetaFrame server.

&RQILJXULQJ￿'LUHFW,&$

Citrix DirectICA provides two programs used for configuring DirectICA stations: DirectICA Configuration and Citrix Connection Configuration. These programs are located in the MetaFrame Tools program folder.

Use DirectICA Configuration to:

uSet the base address or IRQ settings for a multi-VGA adapter

uDisplay version information about Citrix DirectICA (if the multi-VGA adapter driver fails to load, the About tab displays an error message)

Citrix Connection Configuration looks and works like Terminal Connection Configuration, but has additional support for DirectICA. DirectICA connections can be added, copied, and deleted just like connections for other transports.

(QDEOLQJ￿'LUHFW,&$￿6WDWLRQV

Before using DirectICA stations, DirectICA connections must be added using

Citrix Connection Configuration. You must restart the server after installing

DirectICA before you can perform this procedure.

ÃTo add DirectICA connections

1.Logon to the MetaFrame server as an administrator.

2.Click the Start button, point to Programs, point to MetaFrame Tools, and then click Citrix Connection Configuration.