ClearOne comm 600, 900 Basic Connections, Audio conferencing, To set up audio conferencing

14 Connecting the RAV — Basic Connections

Basic Connections

Connecting the RAV should take less than one hour. Once basic connections for audio conferencing are made, the system is ready to use.

Audio conferencing

To set up audio conferencing

1.If you are installing the mixer into a rack, remove the side panels, rotate them and then reattach.

Figure 2.1. Attach rack ears

2. Connect first microphone pod to the mixer with the 25' Cat. 5 cable.

MIC POD IN

IN

25'/7.6m

OUT

Figure 2.2. Connect to first microphone pod

Connecting the RAV — Basic Connections 15

3.Connect the second and third microphone pod using the 12' Cat. 5 cables. (Third microphone on the RAV 900 only).

IN	IN
	OUT

OUT

Figure 2.3. Connect additional microphones

4. Connect the speakers to the mixer.

L + R +

L - R -

SPEAKER

Figure 2.4. Connect speakers

Note: For best performance, speakers must be installed properly. If you are using the ceiling- mount loudspeakers, you must change the setting to 8 Ohms. Refer to the instructions includ- ed in the Bose loudspeaker box.

5. Using the RJ-11 cable, connect an analog telephone jack to the Line jack on the mixer.

TELEPHONE

LINE

Figure 2.5. Connect telephone cable

Note: For instructions on connecting to a digital telephone line, refer to page 22.

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760