ClearOne comm 900, 600 Overview, Accessing the web interface, Dial, To open the dialer window

64 Web Interface — Overview

Overview

Accessing the web interface

The RAV has a built-in web server that provides a remote access interface to your RAV system. However, not all programming and metering functions are available.The web interface allows you to connect to a RAV unit, run system checks, view the event log and manage calls.

To use the web interface from outside your network, your firewall must be properly configured to allow access. If you are accessing RAV from within the network, you may use the network name. The web interface uses Port 80.

To connect to RAV through the web interface

1.Open a web browser and enter the IP address or Network Name of the RAV in the address bar.

2.Enter your User Name and Password.The default user name is ClearOne and the default password is RAV.

Web Interface — Overview 65

Dial

You can make all your calls from the Dialer in the web interface. You can dial a number, redial the last dialed call and disconnect calls. You can also use flash settings, mute the microphones and adjust volume.

To open the dialer window

•Click the Dial button in the left channel navigation.

The RAV web interface opens. Navigation buttons are shown in the left channel.

Figure 5.1. Network Password

Figure 5.3. Dialer window

To make a call

1.Click the ON/OFF button to take the phone off-hook.

2.Using the number pad, dial a phone number just as you would on a standard phone.

Note: You can also pre-dial the number and press the ON/OFF button to connect the call.

Tip: You can also dial using the 0-9, star (*) and number (#) on your on your keyboard. Use the comma (,) key to enter a two second pause.The Enter key connects to and disconnects from the telephone line.

Figure 5.2. RAV-Ware management system

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760 Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760