| 44 |
|
Dialer
While most calls will be made using the RF controller, you can also manage all your calls from the Dialer in
To open the Dialer
•Click the Dialer icon on the configuration window.
Note: This option is only available when you are connected to a RAV unit and have a telephone line connected to the LINE jack on the mixer.
Figure 3.30. Dialer window
To make a call
1.Click the ON/OFF button.
2.Dial the number as you would on a standard phone. The number appears in the display window at the top.
Note: You can also
Tip:You can also dial using the
(,)key to enter a two second pause. The Enter key connects to and disconnects from the tele- phone line.
| 45 |
|
To make a call from the phonebook
1.Using the mouse, select the number in the phonebook.The name and number appear in the display window.
2.Click the ON/OFF button to dial the call.
Tip:You can also
To end a call
•Click the ON/OFF button.
To redial
•Click the REDIAL button.The phone will automatically be taken off hook and the last dialed number will be called.
To send a Flash signal
•The Flash key can be used for call transfer, call waiting or conference calling if your telephone service includes these features. Refer to your local telephone service provider for details.
To mute/unmute
1.Click the MUTE button to mute all microphones.The LED on the microphones will illuminate red.
2.Click the MUTE button again to unmute all the microphones.The LED on the microphones will illuminate green.
To adjust call volume
•Use the UP and DOWN buttons to adjust the call volume to the desired level.
To return to the Configuration screen
• Click the Switch to Flow Window icon to return to the Configuration screen.
Technical Services Group ~ | Technical Services Group ~ |
