| 36 |
|
Loudspeakers
You can adjust your Bose loudspeaker equalization, change volume levels and enable ClearEffect in the Loudspeaker window. Equalization in
To access Loudspeaker settings
•Click the Loudspeaker icon in the configuration screen.
To enable ClearEffect
•Click the ClearEffect Off/On button.The indicator will turn green when ClearEffect is enabled.
When ClearEffect is enabled, it causes the audio coming from the telephone line to emu- late wideband audio. It does this by adding high and low frequencies to the audio signal, creat- ing a fuller sound.
To adjust equalization
•Adjust the the Low, Mid and High frequency tones using the Equalization sliders.
To adjust audio level (volume)
• Using the slider, adjust the volume.
Figure 3.19. Loudspeaker settings
The meter will display output levels.
•Click Close to save the settings.
| 37 |
|
Mixer Console
The Mixer Console allows you to create audio mixes for the different outputs, adjust volume levels and view the output meters. The audio inputs are shown along the left side of the window and the audio outputs are along the top.
To open the Mixer Console
•Click the Mixer Console icon in the Configuration screen.
To create a mix of audio
•Select which audio is to be included in each output mix. A check mark indi- cates the audio will be included in the output mix.
Note:
To adjust audio levels
•Use the sliders to adjust the audio levels for Playback,Telephone, Line In
and the microphone pods. | Figure 3.20. Mixer Console |
Note: You can also adjust levels by opening the configuration windows for each component. Changes made to the levels on the Mixer Console window will be reflected in the configuration windows.
Effects of using an external amplifier
If you connect an external amplifier to the RAV unit on either the Line Out jack or the Record Out jack, the mixer console options change.
•If you place an external amplifier on the Line Output, the options to route any audio to the loudspeakers and to route the microphones to the Line Output are no longer available.
•If you place an external amplifier on Record, the options to route any audio to the loud- speakers and to route the microphones to the Record output are no longer available.
See page 19 for information on
connecting an amplifier. | Figure 3.21. Mixer Console with external amplifier |
|
Technical Services Group ~ | Technical Services Group ~ |
