ClearOne comm 900, 600 user manual Specifications

Models: 900

1 63
Download 63 pages 19.21 Kb
Page 41
Image 41
Specifications

76

Specifications

Dimensions

Mixer (WxDxH) 17" x 7.5" x 2"

(43.2 cm x 19.1 cm x 5.1 cm)

RF Controller (WxDxH) 10.5" x 4.5" x 2.75"

Microphone Pod

Diameter 7" (17.8 cm)

Height 1.5" (3.8 cm)

Weight

Mixer 4.5 lb (2.04 kg)

RF Controller 2.0 lb (.91 kg)

Microphone Pod 1.1 lb (.5 kg)

Environmental

Operating Temperature: 32º to 122º F

0º to 50º C

Power Supply

Primary Voltage: 100 to 240 VAC Auto sensing 50-60 Hz

Audio Performance

Conditions: Unless otherwise specified, all measurements are performed with a

22 Hz to 15 kHz BW limit (no weighting)

Microphone Pod

Coverage: 360 degrees

Connection: RJ-45 with Cat. 5,

Link In/Out Ports

Max Distance from Base Mixer:

50' (RAV 900), 75' (RAV 600)

Frequency Response: 60 Hz - 14 kHz (+/-1dB)

THD+N: < 0.08% (-45dBu input @ 1 kHz)

Sensitivity: -45 dBu

Input Level: -6 dBu for 1 kHz 94 dBSPL microphone input

Appendix — Specifications

Dynamic Range: > 65dB

Line Input

Connection: Unbalanced RCA

Gain: -10 dBu nominal, adjustable from -14 dB to +18 dB

Nominal Level: -10 dBu

Maximum Level: +9 dBu

Impedance: > 10 kOhm

Line Output

Connection: Unbalanced RCA

Nominal Level: -10 dBu, adjustable from -14 dB to +18 dB

Maximum Level: +9 dBu

Frequency Response: 40 Hz - 15 kHz (+/-1dB)

Dynamic Range: > 80 dB

THD+N: < 0.02% (+6 dBu input @1 kHz)

Playback/Record Input

Connection: Unbalanced RCA

Gain: -10 dBu nominal, adjustable from -14 dB to +18 dB

Nominal Level: -10 dBu

Maximum Level: +9 dBu

Impedance: > 10 kOhm

Playback/Record Output

Connection: Unbalanced RCA

Nominal Level: -10 dBu, adjustable from -14 dB to +18 dB

Maximum Level: +9 dBu

Frequency Response: 40 Hz - 15 kHz (+/-1dB)

Dynamic Range: > 80 dB

THD+N: < 0.02% (+6 dBu input @1 kHz)

Appendix — Specifications

Loudspeaker

Connection: Push terminals with left and right

Power: 10 Watts into 8 Ohm load

Impedance: 8 Ohm

Frequency Response: 60 Hz - 15 kHz (+/-1 dB)

Dynamic Range: > 80 dB

THD+N: < 0.5% (+5 dBu line input @1 kHz)

Output Level: 90 dBSPL output @ 1 meter

Mixer

AEC tail time: 128 ms

Adaptive noise cancellation: (6 - 18 dB)

Gating: Adaptive ambient, 1st mic priority, look ahead gating, NOM attenuation

Telephone Interface

Conditions: All measurements taken with ALC disabled

Connection: RJ-11 (Set and Line Jacks)

Tail Time: 30 ms

Frequency Response: 250 Hz to 3.3 kHz (+/-1 dB)

THD+N: < 0.2% (+7 dBu line input @1 kHz)

Dynamic Range: > 60 dB

Communication I/O

10/100 Ethernet Control Port:

RJ-45 with LED indicators for link, duplex and activity status.

RS-232 Control Port:

DB9 female 9,600/19,200/38,400/57,600 (default)/115,200

Baud rate: 8 bits, 1 stop, no parity Hardware flow control on (default)/off

VISCA Camera Port

DIN, 9600 baud, No Flow Control

USB 1.1 Configuration Port

Slave Port

77

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760

Page 41
Image 41
ClearOne comm 900, 600 user manual Specifications