| 46 |
|
Advanced Features
System Checks
The System Diagnostics window allows you to check your RAV system to be sure all components of your system are connected and working properly.
To open System Checks
• Click the System Checks toolbar button.
Note:This option is only available when you are connected to a RAV unit.
To run System Checks
•Click the Start button.
If you are local (in the same room as the loudspeakers), you will hear a tone as the RAV checks all components. When the check is complete, lights will indicate the status of each component. Green indicates the component is connected and functioning. Red indicates a problem with the component.
Figure 3.31. System Checks
| 47 |
|
Event Log
The Event Log keeps record of a
To open the Event Log
•Click the Event Log toolbar button.
To track events
•Select the events you would like to log.
To save an Event Log
1.Click the Save button.
2.Name the file.
3.Click Save.
The log is saved as a .txt file.
To print an Event Log
1.Click the Print button.
2.Select the printer.
3. Click Print. | Figure 3.32. Event Log | |
| ||
| Selection | Function |
| Default | Logs when the mixer settings are defaulted. |
|
|
|
| Reboot | Logs every time the RAV system reboots. |
|
|
|
| Errors | Logs internal errors.The same errors are displayed in the Error Log. |
|
|
|
| Password | Logs failed and successful access through TCP/IP or web interface. |
|
|
|
| Telco | Logs when telco was enabled and disabled. |
|
|
|
| Dialing | Logs dialed numbers. |
|
|
|
| Call Duration | Logs how long each call lasts. |
|
|
|
| System Check | Logs when system checks are performed and the results of the checks. |
|
|
|
| Battery Life | Logs battery level as reported by the RF Controller. |
Technical Services Group ~ | Technical Services Group ~ |
