CNet Technology Inc | Configuration |
Configuration Program
The Broadband Router contains a HTTP server. This enables you to connect to it, and config- ure it, using your Web Browser.
Most Browsers should work, provided they support HTML tables and forms.
Preparation
Before attempting to configure the Broadband Router, please ensure that:
•Your PC can establish a physical connection to the Broadband Router. The PC and the Broadband Router must be directly connected (using one of the Switching Hub ports on the Broadband Router) or on the same LAN segment.
•The Broadband Router must be installed and powered ON.
•If the Broadband Router's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the Broadband Router is allocated a new IP Address during configuration.
Connecting to the Broadband Router
To establish a connection from your PC to the device:
1.After installing the Broadband Router in your LAN, start your PC. If your PC is already running, restart it.
2.Start your WEB browser.
3.In the Address box, enter "HTTP://" and the IP Address of the Broadband Router, as in the following example, which uses the Broadband Router’s default IP Address:
HTTP://192.168.0.1
4.If you have assigned a password to the Broadband Router you will be prompted for the password, as shown below. (If no password has been set, this dialog will not appear.)
•Leave the "User Name" blank.
•Enter the password for this device, if one has been set.
Figure 4: Password Dialog
5.You should then see the LAN screen.
See the following section for the available options and configuration screens.
9
