CNet Technology CNIG904S manual Macintosh Configuration

CNet Technology Inc PC Configuration

Macintosh Configuration

You can access the Internet via the Broadband Router. The procedure is as follows.

1.Open the TCP/IP Control Panel.

2.Select Ethernet from the Connect via pop-up menu.

3.Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank.

4.Close the TCP/IP panel, saving your settings.

Note:

If using manually assigned IP addresses instead of DHCP, the only change required is to set the Router Address field to the Broadband Router's IP Address.

25