Installation, Requirements | CNet Technology CNIG904S guide

Chapter 2	2
Installation

This Chapter covers the physical installation of the Broadband Router.

Requirements

•Ethernet LAN (10/100BaseT) and the TCP/IP protocol.

•For Internet Access, a DSL or Cable modem, and an Internet Access account with an ISP.

Installation Procedure

Figure 3 Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the Broadband Router. Ensure the Broadband Router and the Cable/DSL modem are powered OFF.

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports (LAN ports) on the Broadband Router. Both 10BaseT and 100BaseT connections can be used simultaneously.

If required, connect the Broadband Router's "Uplink" port to a standard port on another hub. A standard LAN cable should be used.

Note: If the "Uplink" port is used, Port 4 can NOT be used.

Page 9

Image 9

CNet Technology CNIG904S manual Requirements, Installation Procedure, Choose an Installation Site, Connect LAN Cables

Contents

User’s Guide Shared Broadband Internet Access Table of Contents Broadband Router Overview General Problems Internet Access Broadband Router Features LAN FeaturesIntroduction Configuration & Management Internet Access FeaturesSecurity Features Advanced Internet Functions Package Contents Physical Details Top Mounted LEDsRear Panel DIP Switches Restore Default IP Address and Clear PasswordDIP Switch Setting Description Installation Procedure InstallationChoose an Installation Site Requirements Power Up Connect Adsl or Cable ModemCheck the LEDs Configuration OverviewTo Do this Refer to Configuration Program Connecting to the Broadband RouterPreparation Navigation & Data Input If you cant connect LAN Screen LAN ConfigurationData LAN Screen IP Address Dhcp Server DNS Domain Name ServerRouting Table WAN Direct Connection WAN ConfigurationTip Data WAN Direct Connection Buttons IP Address Data WAN PPPoE WAN PPPoEAccount Options WAN Status Direct Connection WAN StatusData WAN Status WAN Status PPPoE Status DataConnection Log Message Description Connection Log Messages Data LAN/Device Status LAN/Device StatusDevice LAN Port Status PC Configuration TCP/IP SettingsTo check your PCs TCP/IP Settings Using Specify an IP Address Using Dhcp DNS Tab Win 95/98 Accessing AOL Internet Access Configuration Macintosh Configuration Using another Dhcp Server Using the Broadband Routers Dhcp ServerChapter What Dhcp Does To Configure your PCs to use Dhcp Broadband Router Configuration Using this ScreenRouting Destination Routing Table DataGateway Interface Routing Example Router ConfigurationLocal Router Other Routers on the Local LAN For Router Bs Default Route For Router As Default RouteFor the Broadband Routers Routing Table Entry 1 Segment Password When prompted for the password, leave the User Name blankDevice Options NAT Network Address Translation Remote ManagementTo connect from a remote PC via the Internet Advanced Internet Screen Advanced Internet Special Internet Applications Using a Special ApplicationSpecial Applications Screen At any time, only one 1 PC can use each Special Application Configuration Data from Service Provider Remote PC Virtual ServersIP Address seen by Internet Users Types of Virtual Servers WAN IP Address Virtual Server ConfigurationType LAN IP Address To Modify Edit a defined Server User Defined Virtual ServersTo Delete a defined Server To List all Servers Details Connecting to the Virtual Servers DMZ Screen Configuring the DMZ Enable DMZ EnableFeature Data To use this feature Access Control Security Groups To Change Access for an Existing GroupOperations To Define a Security Group Packet Filter Table Access Rights Internet Access for this Group To Add a New PC PCsTo Delete an Existing PC To Change an Existing PCs Details Filters TCP Filters TCP PacketsPort No UDP Filters General Problems Troubleshooting Internet Access Broadband Router Specifications

CNet Technology CNIG904S Requirements, Installation Procedure, Choose an Installation Site

Models: CNIG904S

Installation