Connection Log Messages | CNet Technology CNIG904S instruction

CNet Technology IncBroadband Router User Guide

Connection Log Messages

Message	Description
Connect on	Connection attempt has been triggered by the "Connect on De-
Demand	mand" setting.

Manual connection	Connection attempt started by the "Connect" button.

Reset physical	Preparing line for connection attempt.
connection

Connecting to remote	Attempting to connect to the ISP's server.
server

Remote Server	ISP's Server has responded to connection attempt.
located

Start PPP	Attempting to login to ISP's Server and establish a PPP connection.

PPP up successfully	Able to login to ISP's Server and establish a PPP connection.

Idle time-out reached	The connection has been idle for the time period specified in the
	"Idle Time-out" field. The connection will now be terminated.

Disconnecting	The current connection is being terminated, due to either the "Idle
	Time-out" above, or "Disconnect" button being clicked.

Error: Remote Server	ISP's Server did not respond. This could be a Server problem, or a
not found	problem with the link to the Server.

Error: PPP Connec-	Unable to establish a PPP connection with the ISP's Server. This
tion failed	could be a login problem (name or password) or a Server problem.

Error: Connection to	The existing connection has been lost. This could be caused by a
Server lost	power failure, a link failure, or Server failure.

Error: Invalid or	The data received from the ISP's Server could not be processed.
unknown packet type	This could be caused by data corruption (from a bad link), or the
	Server using a protocol which is not supported by this device.

18

Image 21

CNet Technology CNIG904S manual Connection Log Messages, Message Description

Contents

User’s Guide Shared Broadband Internet Access Table of Contents Broadband Router Overview General Problems Internet Access Broadband Router Features LAN FeaturesIntroduction Configuration & Management Internet Access FeaturesSecurity Features Advanced Internet Functions Package Contents Physical Details Top Mounted LEDsRear Panel DIP Switches Restore Default IP Address and Clear PasswordDIP Switch Setting Description Installation Procedure InstallationChoose an Installation Site Requirements Power Up Connect Adsl or Cable ModemCheck the LEDs Configuration OverviewTo Do this Refer to Configuration Program Connecting to the Broadband RouterPreparation Navigation & Data Input If you cant connect LAN Screen LAN ConfigurationData LAN Screen IP Address Dhcp Server DNS Domain Name ServerRouting Table WAN Direct Connection WAN ConfigurationTip Data WAN Direct Connection Buttons IP Address Data WAN PPPoE WAN PPPoEAccount Options WAN Status Direct Connection WAN StatusData WAN Status WAN Status PPPoE Status DataConnection Log Message Description Connection Log Messages Data LAN/Device Status LAN/Device StatusDevice LAN Port Status PC Configuration TCP/IP SettingsTo check your PCs TCP/IP Settings Using Specify an IP Address Using Dhcp DNS Tab Win 95/98 Accessing AOL Internet Access Configuration Macintosh Configuration Using another Dhcp Server Using the Broadband Routers Dhcp ServerChapter What Dhcp Does To Configure your PCs to use Dhcp Broadband Router Configuration Using this ScreenRouting Destination Routing Table DataGateway Interface Routing Example Router ConfigurationLocal Router Other Routers on the Local LAN For Router Bs Default Route For Router As Default RouteFor the Broadband Routers Routing Table Entry 1 Segment Password When prompted for the password, leave the User Name blankDevice Options NAT Network Address Translation Remote ManagementTo connect from a remote PC via the Internet Advanced Internet Screen Advanced Internet Special Internet Applications Using a Special ApplicationSpecial Applications Screen At any time, only one 1 PC can use each Special Application Configuration Data from Service Provider Remote PC Virtual ServersIP Address seen by Internet Users Types of Virtual Servers WAN IP Address Virtual Server ConfigurationType LAN IP Address To Modify Edit a defined Server User Defined Virtual ServersTo Delete a defined Server To List all Servers Details Connecting to the Virtual Servers DMZ Screen Configuring the DMZ Enable DMZ EnableFeature Data To use this feature Access Control Security Groups To Change Access for an Existing GroupOperations To Define a Security Group Packet Filter Table Access Rights Internet Access for this Group To Add a New PC PCsTo Delete an Existing PC To Change an Existing PCs Details Filters TCP Filters TCP PacketsPort No UDP Filters General Problems Troubleshooting Internet Access Broadband Router Specifications