CNet Technology CNIG904S manual Configuration Data from Service Provider

CNet Technology Inc Broadband Router User Guide

•To Enable a defined Application

-Select it from the drop-down list

-Click "Get Data"

-Check the Enable checkbox

-Click "Update"

•To Disable a defined Application

-As above, but uncheck the Enable checkbox.

•To Delete a defined Application

-Select it from the drop-down list,

-Click "Delete"

•To Modify (Edit) a defined Application

-Select it from the drop-down list,

-Click "Get Data"

-Make any desired changes

-Click "Update"

•To Create a new Application

-Click "Clear Form"

-Enter the required data, as described below

-Click "Add"

•To List all Applications

-Click "List All"

Configuration Data (from Service Provider)

This data must be obtained from the service provider.

Name	Enter a descriptive name to identify this application entry.
Enable	Use this to Enable or Disable support for this application, as required.
Outgoing
Protocol	The protocol (TCP or UDP) used when you connect to the special applica-
	tion service.
Port Range:	The beginning of the range of port numbers used by the application server,
Start	for data you send to it. If the application uses a single port number, enter it in
	both the "Start" and "Finish" fields.
Port Range:	The end of the range of port numbers used by the application server, for data
Finish	you send.
Incoming
Protocol	The protocol (TCP or UDP) used when the application or service sends data
	to you.
Port Range:	The start of the range of port numbers used by the application server when
Start	data is sent to you. If using only one port number, enter it in both the "Start"
	and "Finish" fields.
Port Range:	The end of the range of port numbers used by the application server, when
Finish	data is sent to you.

36