CNet Technology Inc | Configuration |
LAN Screen
The LAN screen, like the example below, will be displayed when you first connect.
Figure 5: LAN Screen
LAN Configuration.
For most users, the default values for these fields should be satisfactory, and no changes will be required.
If your LAN contains an existing Router or Routers, refer to Chapter 6 - Routing.
Data – LAN Screen
TCP/IP
IP Address | IP address for the Broadband Router. Use the default value of |
| 192.168.0.1 unless the address is already in use or your LAN is using a |
| different IP address range. In the latter case, enter an unused IP Ad- |
| dress from within the range used by your LAN. |
|
|
Network Mask | The default value 255.255.255.0 is standard for small (class "C") |
| networks. For other networks, use the Network Mask for the LAN |
| segment to which the Broadband Router is attached. i.e. the same value |
| as the PCs on that LAN segment. |
|
|
11
