CNet Technology Inc | Configuration |
WAN Status – PPPoE
| Figure 10: WAN Status – PPPoE |
Status Data |
|
|
|
WAN Status |
|
Physical Address | The "Hardware" address of this device, as seen by other devices on the |
| WAN. |
|
|
IP Address | The IP Address of this device, as seen by devices on the WAN. |
| (This device has 2 IP Addresses; one for the local LAN, and another |
| for the WAN port.) |
|
|
Network Mask | The Network Mask (Subnet Mask) for the IP Address above. |
|
|
PPPoE Link | This indicates whether or not the connection is currently established. |
Status | If the connection does not exist, the Connect button can be used to |
| |
| establish a connection. |
| If the connection currently exists, the Disconnect button can be used to |
| break the connection. |
|
|
Connection Log |
|
|
|
Log Data
The Connection Log shows status messages relating to the existing connection.
The most common messages are listed in the following table.
Buttons
Connect | If not connected, establish a connection to your ISP |
|
|
Disconnect | If connected to your ISP, hang up the connection. |
|
|
Clear Log | Delete all data currently in the Log. This will make it easier to read new |
| messages. |
|
|
Refresh | Contact this device and update the Log data. |
|
|
17
