CNet Technology IncBroadband Router User Guide
DHCP Server
Operation | If Enabled, the Broadband Router will allocate IP Addresses to PCs on |
| your LAN. The default and recommended value is Enabled. |
| If you are already using a DHCP Server, this setting must be |
| DISABLED, and the existing DHCP server must be |
| Chapter 5 for further details. |
|
|
Start IP Address | The IP Start Address and IP Finish Address fields set the values used |
Finish IP Ad- | by the DHCP server. |
dress | This range also determines the number of DHCP clients supported. |
| (Maximum 253.) |
|
|
DNS (Domain Name Server)
DNS (Domain
Name Server)
IP Addresses
You do NOT need to enter DNS addresses UNLESS you are using a Fixed IP Address on the WAN port. (Your ISP has allocated you a fixed IP Address.) In this case, your ISP should recommend a DNS. You need to enter that address or addresses here.
If using a Dynamic IP Address (DHCP Client), on the WAN port, the DNS entries are optional.
Multiple DNS entries should be entered in the order you want them accessed. (The first available DNS will be used.)
Routing Table
Routing Table | If your LAN contains an existing Router or Routers, refer to Chapter 6 |
| - Routing. |
12
