CNet Technology CWR-800 manual

feature, keep the default setting, Disable. To set up a filter, click Enable, and follow these instructions:

1.If you want to block specific wireless-equipped PCs from communicating with the Router, then keep the default setting, Prevent PCs listed from accessing the wireless network. If you want to allow specific wireless equipped PCs to communicate with the Router, then click the radio button next to Permit only PCs listed to access the wireless network.

2.Click the Edit MAC Filter List button. Enter the appropriate MAC addresses into the MAC fields. For each MAC field, the MAC address should be entered in this format xxxxxxxxxxxx (the x’s represent the actual characters of the MAC address).

3.Click the Apply button to save your changes. Click the Cancel button to cancel your unsaved changes. Click the Close button to return to the Advanced Wireless screen without saving changes.

4.On the MAC Address Filter List screen, select the MAC Address 1~20 or MAC Address 21~40 to view a list of the wireless-equipped PCs.