4.Power on the cable or DSL modem.
5.Connect the power adapter to the Router’s Power port, and then plug the power adapter into a power outlet.
•The Power LED on the front panel will light up green as soon as the power adapter is connected properly.
6.Power on one of your PCs.
If you want to use a wireless connection to access the Router, follow these instructions:
1.Before you begin, make sure that all of your network’s hardware is powered off, including the Router, PCs, and cable or DSL modem.
2.Connect an Ethernet network cable from your cable or DSL modem to the Internet port on the Router’s rear panel. This is the only port that will work for your modem connection.
