Accessing the 9084 Card via Remote Control | Cobalt Networks

3Accessing the 9084 Card via Remote Control

Accessing the 9084 Card via Remote Control

Access the 9084 card using DashBoard™ or Cobalt® Remote Control Panel as described below.

Accessing the 9084 Card Using DashBoard™

1.On the computer connected to the frame LAN, open DashBoard™ .

2.As shown below, in the left side Basic View Tree locate the Network Controller Card associated with the frame containing the 9084 card to be accessed (in this example, “MFC-8310-N SN: 00108053”).

DB_ACCESS1.PNG

3.As shown below, expand the tree to access the cards within the frame. Click on the card to be accessed (in this example,

“Slot 7: CDI-9084 Color Corrector 1A”).

.

9084_DB_ACCESS2A.PNG

As shown on the next page, when the card is accessed a DashBoard™ function submenu screen is displayed. (The particular submenu screen displayed is the previously displayed screen from the last time the card was accessed by DashBoard™ ).

3-10

9084 PRODUCT MANUAL

9084-OM (V4.0)

Image 34

Cobalt Networks manual Accessing the 9084 Card via Remote Control, Accessing the 9084 Card Using DashBoard

Contents

9084 Cobalt Digital Inc Disclaimer CopyrightTrademark Information Table of Contents Operating Instructions Introduction Overview Card Software Versions and this Manual SupportDownloads link at Manual Conventions E201 Safety Summary Labeling Symbol Definitions Functional Description Input/Outputs Video ProcessorColor Corrector Frame Sync Function Color CorrectorVideo Processor AFD Inserter Card Edge Controls Computer with NIC DashBoard Remote ControlUser Control Interface Controller Card Other cards installed in openGear frames such as the Cobalt Video Formats Supported by Rear I/O ModulesRaster Structure Frame Rate Technical Specifications Characteristic Technical Specifications Introduction Warranty and Service Information Cobalt Digital Inc. Limited Warranty Fax Contact Cobalt Digital IncPhone Web General Information Technical Support This page intentionally blank Installation and Setup Installing the 9084 Into a Frame Slot Installing the 9084 Into a Frame Slot Installation and Setup Installing a Rear I/O Module Setting Up 9084 Network Remote Control Rear I/O Module Installation Operating Instructions Control and Display Descriptions Function Submenu/Parameter Submenu Overview Submenu a Submenu b Submenu z Individual Parameters Card Edge Controls, Indicators, and Display Function Menu Depth LEDs Card Edge Control Menu/Submenu StructureNone Submenu Depth Card Edge Setup Abbreviated DiagramVid ClrC S p DashBoard User Interface Channel Black Adj Set Enable to OnCorrection Cobalt Remote Control Panel User Interfaces Control Panel Setup of Example Video Proc Function Accessing the 9084 Card via Remote Control Accessing the 9084 Card Using DashBoard Accessing the 9084 Card Using a Cobalt Remote Control Panel Checking 9084 Card Information Checking Card Using Info Card Edge ControlsPower Consumption and Temperature Displays Software Version Number Format Default Line No. / RangeAncillary Data Line Number Locations and Ranges Line No. Limiting Format Function Submenu List and Descriptions Function Submenu Item Luma Gain Reset to UnityVideo Proc Luma Lift Gang Luma and Color Gain Color PhaseColor Gain Black Hard Clip Card Edge Control Menu Applies white hard clip limiting at specified percentage50.0% to 109.1% null = 109.1% Applies white soft clip limiting at specified percentage Output Code Output ModeIncoming AFD Output Line Operating Instructions Black Adj. Green Red Blue Gang Black Level Controls White Adj. Green Red Blue Gang Gamma Controls Vertical Delay Control Framesync EnableHorizontal Delay Control Minimum Latency Frames Control Video Delay DisplayLoss of Input Signal Selection Framesync Status Display Custom Color Hue Reset FramesyncFramesync LOS Freeze Color Custom Color Saturation Preset Save and Load Preset Name field and Preset Save buttonPreset Load button and the Selected Preset Selected Preset drop-down list Preset Name Reset Current PresetFunction Parameter/Setting Video Proc Download Presets On-Set Monitor Color Correction Example Color and Video Correction Examples UsingFeed To Switcher Anchor Desk Set with Monitor 10 Uncorrected Uncompensated Monitor Waveform To Switcher From Monitor Video Feed 12 Applying Correction to Example Monitor Waveform Signal Condition Observed On Waveform Monitor Correction Using Miscellaneous Color and Video Correction Examples Luma gain less than 100% level as shown below for VAR10.PNG VAR10A.PNG Troubleshooting Error and Failure Indicator Overview Character Alphanumeric Display Card Edge Status/Error Indicators and DisplayStatus/Error Input Format Indicators Indicators Alphanumeric DashBoard Status/Error Indicators and Displays Indicator Icon or Display Error Description 15 Selecting Specific Cards for Card Info Status Display Basic Troubleshooting Checks Checks Processing Error Troubleshooting Symptom Error/Condition Corrective Action Troubleshooting Network/Remote Control Errors Case of ProblemsPage 2406 E. University Ave. Urbana, IL 9084-OM