Cobalt Networks 9084 Function Submenu/Parameter Submenu Overview

3Control and Display Descriptions

3-2 9084 PRODUCT MANUAL 9084-OM (V4.0)

Note: Instructions provided here are applicable for all available user control meth-

ods. However, DashBoard™ and the Remote Control Panel provide greatly

simplified user interfaces as compared to using the 9084 card edge controls.

For this reason, it is strongly recommended that DashBoard™ or a Remote

Control Panel be used for all 9084 applications other than the most basic

cases.

Note: Not all functions available using DashBoard™ or the Control Panel are avail-

able using the card edge controls.

Note: When a setting is changed, settings displayed on DashBoard™ (or the

Remote Control Panel) are the settings as effected by the 9084 card itself and

reported back to the remote control; the value displayed at any time i s the

actual value as set on the card.

Function Submenu/Parameter Submenu Overview

The functions and related parameters available on the 9084 card are organized

into function submenus, which consist of parameter groups as shown below.

Figure 3-1 shows how the 9084 card and its submenus are organized, and also

provides an overview of how navigation is performed between cards, function

submenus, and parameters.

Figure 3-1 Function Submenu/Parameter Submenu Overview

9084

Submenu a Submenu b Submenu z

• • •

Individual Parameters

Each submenu consists of groups of parameters

related to the function submenu. Using the “Video

Proc” function submenu example, the individual

parameters for this function consist of various video

processor parameters such as Luma Gain, Color Gain,

and so on.

If using DashBoard™ or a Remote Control Panel, the

desired 9084 card is first selected.

The desired function submenu is next

selected.

Function Submenus consist of parameter

groups related to a particular 9084 card

function (for example, “Video Proc”).

Contents

Main Product Manual Copyright Disclaimer Trademark Information Table of Contents Page Chapter 1 1 9084 Card Software Versions and this Manual Introduction Manual Conventions E201 Warnings, Cautions, and Notes Warnings Cautions 1 Labeling Symbol Definitions Safety Summary Warnings Cautions ! WARNING ! Introduction 9084 Functional Description 9084 Input/Outputs 1-6 Color Corrector Figure 1-1 9084 Functional Block Diagram Video Processor Introduction Color Corrector Video Processor Frame Sync Function AFD Inserter User Control Interface Figure 1-2 9084 User Control Interface Introduction 9084 Rear I/O Modules Video Formats Supported by the 9084 Introduction Technical Specifications 1 Introduction 1 Warranty and Service Information Cobalt Digital Inc. Limited Warranty Introduction Contact Cobalt Digital Inc. Page Chapter 2 Installing the 9084 Into a Frame Slot 2 Installation and Setup Installing a Rear I/O Module 2 Setting Up 9084 Network Remote Control 1 2 Chapter 3 Control and Display Descriptions Function Submenu/Parameter Submenu Overview 9084 Card Edge Controls, Indicators, and Display Figure 3-2 shows and describes the 9084 card edge controls, indicators, and display. Figure 3-2 9084 Controls, Indicators, and Display Item Function 9084 Card Edge Control Menu/Submenu Structure Figure 3-3 Card Edge Controls Setup of Example Color Correction Function 12 34 Submenu Depth Vid A B C D E F G H I 3-6 D i s p Disp DashBoard User Interface 3-8 Figure 3-5 DashBoard Setup of Example Color Correction Function Cobalt Remote Control Panel User Interfaces 3 Accessing the 9084 Card via Remote Control Accessing the 9084 Card Using DashBoard Operating Instructions Accessing the 9084 Card Using a Cobalt Remote Control Panel Press the Select Device key and select a card as shown in the example below. 3 Checking 9084 Card Information Operating Instructions Ancillary Data Line Number Locations and Ranges Item Default Line No. / Range SD HD 9084 Function Submenu List and Descriptions Table 3-2 9084 Function Submenu List Provides the following Video Proc parametric controls. Video Proc 3-16 Page 3-18 Allows assignment of AFD (Active Format Description) codes to the SDI output video. Color Correction 3-20 Page 3-22 Provides video Frame Sync and delay control tools. (continued) Minimum Latency Frames Control 3-24 (continued) Reset Framesync Page 3-26 Color and Video Correction Examples Using the 9084 On-Set Monitor Color Correction Example Page Page 3-30 Figure 3-12 Applying Correction to Example Monitor Waveform Signal Miscellaneous Color and Video Correction Examples 3-32 Condition Observed On Waveform Monitor Correction Using 9084 Troubleshooting Error and Failure Indicator Overview 9084 Card Edge Status/Error Indicators and Display Figure 3-13 9084 Card Edge Status Indicators and Display Item Function 3-36 DashBoard Status/Error Indicators and Displays Figure 3-14 DashBoard Status Indicator Icons and Display Indicator Icon or Display Error Description Figure 3-15 Selecting Specific Cards for Card Info Status Display 3-38 Basic Troubleshooting Checks Item Checks 9084 Processing Error Troubleshooting Symptom Error/Condition Corrective Action Troubleshooting Network/Remote Control Errors In Case of Problems