Cobalt Networks 9084 Preset Name field and Preset Save button, Preset Save and Load, Card Name

Operating Instructions		9084 Function Submenu List and Descriptions
Table 3-2	9084 Function Submenu List — continued
		This function allows up to 16 card user settings
		configuration presets to be saved in a Preset and then
		recalled (loaded) as desired. All current settings (including
		list selections and scalar (numeric) control settings such as
		Gain, etc.) are saved when a Preset Save is invoked.
		The Preset Name field and Preset Save button
		allow custom user setting configurations to be
		labeled and saved to a Preset for future use.
		The Preset Load button and the Selected Preset
		drop-down list allow saved presets to be selected
		and loaded as desired. When a preset is loaded, it
		immediately becomes active with all user settings
		now automatically set as directed by the preset.
		Saved presets can be uploaded to a computer for
		use with other same-model COMPASS™ cards.
		Each of the items to the left are described in detail on
		the following pages.
	• Preset Save and Load	• Preset Save stores all current card control settings to the currently
		selected preset.
		(For example, if Preset 1 is selected in the Selected Preset drop-down
		list, clicking and confirming Preset Save will then save all current card
		control settings to Preset 1)
		• Preset Load loads (applies) all card control settings defined by
		whatever preset (Preset 1 thru Preset 16) is currently selected in the
		Selected Preset drop-down list.
		(For example, if Preset 3 is selected in the Selected Preset drop-down
		list, clicking and confirming Preset Load will then apply all card control
		settings defined in Preset 3)
		The above buttons have a Confirm? pop-up that appears, requesting
		confirmation.
		Note: Applying a change to a preset using the buttons described above
		rewrites the previous preset contents with the invoked contents.
		Make certain change is desired before confirming preset change.
	• Selected Preset	Selected Preset 1 thru Selected Preset 16 range in drop-down list
		selects one of 16 stored presets as ready for Save (being written to) or for
		Load (being applied to the card).
		Note: The preset names shown to the left are the default (unnamed)
	•	preset names. All 16 presets in this case are loaded identically with
		the factory default settings.
	•
	•
	• Card Name	Text entry field provides for optional entry of card name, function, etc. (as
		shown in this example).
		Note: Card name can be 31 ASCII characters maximum.

9084-OM (V4.0) 9084 PRODUCT MANUAL 3-25