Cobalt Networks 9084 9084 Card Edge Control Menu/Submenu Structure

3Control and Display Descriptions

3-4 9084 PRODUCT MANUAL 9084-OM (V4.0)

9084 Card Edge Control Menu/Submenu Structure

(See below.) Using the menu system of group men us and s ubmenus descr ibed

earlier, the 9084 parameters/controls are organized int o menus an d submenus.

As appropriate, a submenu similarly may have its own further additional

subordinate submenus.

Figure 3-3 shows an example of using the card edge controls to access the

Color Correction menu (along with some of its submenus) to adjust color

channel gain and 0-levels. through in Figure 3-3 denote the discrete

tasks required in performing the example setup using the 9084 card edge

controls.

In this example, the following adjustment is being performed:

•White Adjust Blue (Blue channel gain) is changed from default unity

to 94.0.

•Black Adjust Red (Red channel 0-level) is changed from default

unity to -10.0.

Due to the limited control available when us ing the card edge control user

interface, the navigation into and out of submenus shown in Figure 3-3 is

required to perform the adjustments described above.

Menu Group Item

Submenu 1

(Submenu 1 selection items)

Submenu 2

(Submenu 2 selection items)

Submenu 3

(Submenu 3 selection

items and/or parameter

values)

Submenu 4

(Submenu 4 selection

items and/or

parameter values)

Menu depth (as indicated by

Menu Depth 9084 Menu Depth LEDs)

none

1

2

3

4

A I

Contents

Main Product Manual Copyright Disclaimer Trademark Information Table of Contents Page Chapter 1 1 9084 Card Software Versions and this Manual Introduction Manual Conventions E201 Warnings, Cautions, and Notes Warnings Cautions 1 Labeling Symbol Definitions Safety Summary Warnings Cautions ! WARNING ! Introduction 9084 Functional Description 9084 Input/Outputs 1-6 Color Corrector Figure 1-1 9084 Functional Block Diagram Video Processor Introduction Color Corrector Video Processor Frame Sync Function AFD Inserter User Control Interface Figure 1-2 9084 User Control Interface Introduction 9084 Rear I/O Modules Video Formats Supported by the 9084 Introduction Technical Specifications 1 Introduction 1 Warranty and Service Information Cobalt Digital Inc. Limited Warranty Introduction Contact Cobalt Digital Inc. Page Chapter 2 Installing the 9084 Into a Frame Slot 2 Installation and Setup Installing a Rear I/O Module 2 Setting Up 9084 Network Remote Control 1 2 Chapter 3 Control and Display Descriptions Function Submenu/Parameter Submenu Overview 9084 Card Edge Controls, Indicators, and Display Figure 3-2 shows and describes the 9084 card edge controls, indicators, and display. Figure 3-2 9084 Controls, Indicators, and Display Item Function 9084 Card Edge Control Menu/Submenu Structure Figure 3-3 Card Edge Controls Setup of Example Color Correction Function 12 34 Submenu Depth Vid A B C D E F G H I 3-6 D i s p Disp DashBoard User Interface 3-8 Figure 3-5 DashBoard Setup of Example Color Correction Function Cobalt Remote Control Panel User Interfaces 3 Accessing the 9084 Card via Remote Control Accessing the 9084 Card Using DashBoard Operating Instructions Accessing the 9084 Card Using a Cobalt Remote Control Panel Press the Select Device key and select a card as shown in the example below. 3 Checking 9084 Card Information Operating Instructions Ancillary Data Line Number Locations and Ranges Item Default Line No. / Range SD HD 9084 Function Submenu List and Descriptions Table 3-2 9084 Function Submenu List Provides the following Video Proc parametric controls. Video Proc 3-16 Page 3-18 Allows assignment of AFD (Active Format Description) codes to the SDI output video. Color Correction 3-20 Page 3-22 Provides video Frame Sync and delay control tools. (continued) Minimum Latency Frames Control 3-24 (continued) Reset Framesync Page 3-26 Color and Video Correction Examples Using the 9084 On-Set Monitor Color Correction Example Page Page 3-30 Figure 3-12 Applying Correction to Example Monitor Waveform Signal Miscellaneous Color and Video Correction Examples 3-32 Condition Observed On Waveform Monitor Correction Using 9084 Troubleshooting Error and Failure Indicator Overview 9084 Card Edge Status/Error Indicators and Display Figure 3-13 9084 Card Edge Status Indicators and Display Item Function 3-36 DashBoard Status/Error Indicators and Displays Figure 3-14 DashBoard Status Indicator Icons and Display Indicator Icon or Display Error Description Figure 3-15 Selecting Specific Cards for Card Info Status Display 3-38 Basic Troubleshooting Checks Item Checks 9084 Processing Error Troubleshooting Symptom Error/Condition Corrective Action Troubleshooting Network/Remote Control Errors In Case of Problems