Cobalt Networks Checking 9084 Card Information, Checking Card Using Info Card Edge Controls

3 Checking 9084 Card Information

Checking 9084 Card Information

The operating status and software version the 9084 card can be checked using the card edge control user interface or DashBoard™ . Figure 3-7shows and describes the 9084 card information screen using DashBoard™ and accessing card information using the card edge control user interface.

Note: Proper operating status in DashBoard™ is denoted by green icons for the sta- tus indicators shown in Figure 3-7.Yellow or red icons respectively indicate an alert or failure condition. Refer to Troubleshooting (p. 3-34)for corrective action.

The Tree View shows the cards seen by DashBoard™ . In this example, Network Controller Card MFC-8310-N (serial number ...8055) is hosting a 9084 card in slot 7.

Software Version Number

Refer to these numbers to check that documentation (such as this manual) matches the card’s Software Release Number and Software Build Number. Use these numbers also when communicating to Cobalt® regarding this card.

Power Consumption and Temperature Displays

This display shows the power consumed by the 9084 for both the +12V and -7.5V rails, as well as key device temperatures.

Status Displays

These displays show the status

the signal being received by the 9084. Green Settings icon shows that any changes made on DashBoard™ are sucessfully saved on the card’s memory.

9084_CARD_INFO_V4.PNG

Checking Card Using	Info
Card Edge Controls

1 2

+POW

(value) +12V Watts consumed

-POW

(value) - 7.5V Watts consumed

SWR#

(value) Software Release Number

SWB#

(value) Software Build Number

Figure 3-7 9084 Card Info Utility

3-12 9084 PRODUCT MANUAL 9084-OM (V4.0)