1 | Safety Summary |
Labeling Symbol Definitions
Attention, consult accompanying documents.
Electronic device or assembly is susceptible to damage from an ESD event. Handle only using appropriate ESD prevention practices.
If ESD wrist strap is not available, handle card only by edges and avoid contact with any connectors or components.
Symbol (WEEE 2002/96/EC)
For product disposal, ensure the following:
•Do not dispose of this product as unsorted municipal waste.
•Collect this product separately.
• Use collection and return systems available to you.
Safety Summary
Warnings
! WARNING !
To reduce risk of electric shock do not remove line voltage service barrier cover on frame equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Cautions
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
This device is intended for environmentally controlled use only in appropriate video terminal equipment operating environments.
This product is intended to be a component product of an openGear™ frame. Refer to the openGear™ frame Owner's Manual for important safety instructions regarding the proper installation and safe operation of the frame as well as its component products.
Heat and power distribution requirements within a frame may dictate specific slot placement of cards. Cards with many
If required, make certain Rear I/O Module(s) are installed before installing the 9084 into the frame slot. Damage to card and/or Rear I/O Module can occur if module installation is attempted with card already installed in slot.
If card resists fully engaging in rear I/O module mating connector, check for alignment and proper insertion in slot tracks. Damage to card and/or rear I/O module may occur if improper card insertion is attempted.
9084 PRODUCT MANUAL |
