Cobalt Networks 9084 instruction

Operating Instructions

Troubleshooting

Access Card Info panes for specific cards by clicking the card slot position in the Card Access/Navigation Tree pane (as shown in the example in Figure 3-15).

By clicking on “Slot 0: MFC-8310-N” in this example, Card Info is displayed for frame Network Controller Card

Status for selected card is

shown here (in this example, connection OK and “Fan Door Open” alert)

Card general information is displayed in lower portion of Card Info pane

9084_TS_CARD_INFO_ACCESS.PNG

By clicking on “Slot 7: CDI-9084 Color Corrector 1A” in this example, Card Info is shown for 9084 card in slot 7

Status for selected card is shown here (in this example, all indications are OK)

Where applicable, additional status is displayed (as shown in this example)

9084_CARD_INFO_V4.PNG

Figure 3-15 Selecting Specific Cards for Card Info Status Display

9084-OM (V4.0)

9084 PRODUCT MANUAL

3-37

Image 61

Cobalt Networks 9084 manual Selecting Specific Cards for Card Info Status Display

Contents

Cobalt Digital Inc 9084 Disclaimer CopyrightTrademark Information Table of Contents Operating Instructions Overview Introduction SupportDownloads link at Card Software Versions and this Manual E201 Manual Conventions Labeling Symbol Definitions Safety Summary Input/Outputs Functional Description Video ProcessorColor Corrector Video Processor Color CorrectorFrame Sync Function AFD Inserter User Control Interface Computer with NIC DashBoard Remote ControlCard Edge Controls Controller Card Other cards installed in openGear frames such as the Cobalt Video Formats Supported by Rear I/O ModulesRaster Structure Frame Rate Characteristic Technical Specifications Technical Specifications Introduction Cobalt Digital Inc. Limited Warranty Warranty and Service Information Phone Contact Cobalt Digital IncFax Web General Information Technical Support This page intentionally blank Installing the 9084 Into a Frame Slot Installation and Setup Installing the 9084 Into a Frame Slot Installing a Rear I/O Module Installation and Setup Rear I/O Module Installation Setting Up 9084 Network Remote Control Control and Display Descriptions Operating Instructions Submenu a Submenu b Submenu z Individual Parameters Function Submenu/Parameter Submenu Overview Function Card Edge Controls, Indicators, and Display Menu Depth LEDs Card Edge Control Menu/Submenu StructureNone Vid Card Edge Setup Abbreviated DiagramSubmenu Depth ClrC S p DashBoard User Interface Channel Black Adj Set Enable to OnCorrection Control Panel Setup of Example Video Proc Function Cobalt Remote Control Panel User Interfaces Accessing the 9084 Card Using DashBoard Accessing the 9084 Card via Remote Control Accessing the 9084 Card Using a Cobalt Remote Control Panel Power Consumption and Temperature Displays Checking Card Using Info Card Edge ControlsChecking 9084 Card Information Software Version Number Ancillary Data Line Number Locations and Ranges Default Line No. / RangeFormat Line No. Limiting Format Function Submenu Item Function Submenu List and Descriptions Video Proc Reset to UnityLuma Gain Luma Lift Color Gain Color PhaseGang Luma and Color Gain Black Hard Clip 50.0% to 109.1% null = 109.1% Applies white hard clip limiting at specified percentageCard Edge Control Menu Applies white soft clip limiting at specified percentage Incoming AFD Output ModeOutput Code Output Line Black Adj. Green Red Blue Operating Instructions White Adj. Green Red Blue Gang Black Level Controls Gang Gamma Controls Vertical Delay Control Framesync EnableHorizontal Delay Control Loss of Input Signal Selection Video Delay DisplayMinimum Latency Frames Control Framesync Status Display Framesync LOS Freeze Color Reset FramesyncCustom Color Hue Custom Color Saturation Preset Load button and the Selected Preset Preset Name field and Preset Save buttonPreset Save and Load Selected Preset drop-down list Function Parameter/Setting Video Proc Reset Current PresetPreset Name Download Presets Feed To Switcher Color and Video Correction Examples UsingOn-Set Monitor Color Correction Example Anchor Desk Set with Monitor 10 Uncorrected Uncompensated Monitor Waveform To Switcher From Monitor Video Feed 12 Applying Correction to Example Monitor Waveform Signal Miscellaneous Color and Video Correction Examples Condition Observed On Waveform Monitor Correction Using Luma gain less than 100% level as shown below for VAR10.PNG VAR10A.PNG Error and Failure Indicator Overview Troubleshooting Status/Error Input Format Indicators Indicators Card Edge Status/Error Indicators and DisplayCharacter Alphanumeric Display Alphanumeric Indicator Icon or Display Error Description DashBoard Status/Error Indicators and Displays 15 Selecting Specific Cards for Card Info Status Display Checks Basic Troubleshooting Checks Symptom Error/Condition Corrective Action Processing Error Troubleshooting Case of Problems Troubleshooting Network/Remote Control ErrorsPage 2406 E. University Ave. Urbana, IL 9084-OM