Cobalt Networks 9084 manual To Switcher From Monitor Video Feed

Operating Instructions Color and Video Correction Examples Using the 9084

Figure 3-11 shows the same setup using the 9084 Color Corrector function, along with the appropriate signal source standard and a video waveform monitor to assess and determine the color correction required. In the calibration setup shown in Figure 3-11 the feed to the switcher is monitored by a WFM 7120 Waveform Monitor, with the set monitor being fed a monochrome linear limit ramp by a TG700 siggen.

	Anchor Desk Set with Monitor
		9084 Card
	WFM 7120 Waveform	TG700 Siggen
	Monitor
To Switcher		From Monitor Video Feed

Figure 3-11 Example Setup Using Control Panel Color Corrector Function

Using the 9084 Color Corrector function and setup shown in Figure 3-11, this condition can be corrected through compensation using the 9084 Color Corrector function as shown in Figure 3-12.

Note: As shown in Figure 3-12, a recommended approach to performing color cor- rections is to first apply offset correction, then gain correction, and finally gamma correction.

9084-OM (V4.0) 9084 PRODUCT MANUAL 3-29