Software and Documentation Requirements | Compaq LP8000-F1 specs

2-2Compaq StorageWorks 64-Bit PCI-To-Fibre Channel Host Bus Adapter User Guide

Software and Documentation

Requirements

The following documentation and software kit is supplied with the HBA.

■User Guide:Part Number 173941-001 (AA-RKPDA-TE)

■Release Notes: Part Number 173940-001 (AA-RKPEA-TE)

■Software Replication License: Part Number AV-R9RUA-TE

■Diskette 1: This diskette contains the following files for Windows NT

4.0systems.

Firmware Download Utility Firmware

Readme Files: README FIRST, FIRMWARE README, DOWNLOAD README, RELEASE NOTES, and USER GUIDE

■Diskette 2: This diskette contains the following files for Windows NT

4.0systems. Driver

OEMSETUP.INF

TXTSETUP.OEM LPSCSI LPUTILNT.EXE

Readme Files: README FIRST and LPUTILNT README

■Diskette 3: This diskette contains the following files for Alpha platforms running Tru64Unix or OpenVMS operating systems.

Firmware Download Utility

qFirmware

Readme Files: README FIRST, FIRMWARE README, DOWNLOAD README, RELEASE NOTES, and USER GUIDE

Image 18

Compaq LP8000-F1 manual Software and Documentation Requirements, OEMSETUP.INF TXTSETUP.OEM Lpscsi LPUTILNT.EXE

Contents

Bit PCI-To-Fibre Channel Host Bus Adapter Page Contents Device Driver Installation Glossary Index List of Figures About This Guide Text Conventions Symbols in Text Symbols on Equipment Getting Help Compaq Technical Support Compaq Website Compaq Authorized Reseller Introduction OverviewProduct Description Bit PCI-to-fibre channel host bus adapter Jumper Pins Description Device ID Comments Jumper SettingsHBA Jumper Settings Bit PCI-to-Fibre Channel Host Bus Adapter Performance Specifications Standards Agency Approvals Page Installation Installation OverviewHardware Requirements OEMSETUP.INF TXTSETUP.OEM Lpscsi LPUTILNT.EXE Software and Documentation Requirements Installing the HBA into a Computer Recording Reference NumbersRecording the Address and Serial Number Post LED Indicators Verifying the InstallationConfiguration Guidelines for Operating Systems Green LED Yellow LED State Installation Page Device Driver Installation IntroductionWindows NT 4.0 System Requirements Installing the Windows NT Scsi Device Driver Verifying the Device Driver Installation Removing the Device Driver Show Adapter / -SET Adapter Commands Tru64Unix Driver and Console Software Show Adapter Command WWIDMGR-SHOW Adapter SET Adapter example OpenVMS Driver and Console Software Page Troubleshooting Post Conditions and Results Windows NT Event Viewer HBA Post LED StatesGreen LED Yellow LED Description Windows NT Scsi Port Error Log Windows NT Miniport Event Log CodesExplanation Windows NT Scsi Port Error Log 0x10 Explanation 0x11to 0x13 Further Information Offset Windows NT Scsi Port Error Log 0x10 Explanation Offset 0xF3 0xF4 HBA reset0x11 to 0x13 Further Information Further Information Parameter Error Values valid only when CmdStat=0x3CmdStat Values 0x12 Offset Explanation Parameter Error Values valid only when CmdStat=0x3 0x12 Offset Windows NT Scsi Address Mapping Fabric Device Mapping Bus # Target# Lun# Private Loop Device MappingCurrent Private Loop Device Mapping None Current Private Loop Device Mapping Current Private Loop Device Mapping Bus # Target# Lun# Current Private Loop Device Mapping Alpa Selid Current Private Loop Device Mapping Alpa Selid Current Private Loop Device Mapping Alpa Selid Page Firmware and Diagnostic Utility Diagnostic and Firmware Download Utility I386 System Installation Starting I386DNLD.EXE in an i386 System Starting Alpha Systems with Alpha Bios I386DNLD.EXE Command OptionsOption Description Start-Up for Alpha/i386 Systems Return Diagnostics Main Menu I386DNLD.EXE Main Menu OptionsMenu Selection Modify Test Options MaintenanceTest Host Bus Adapters Restart Host Bus Adapters Diagnostic and Firmware Loader Utility Show Host Bus Adapter InfoQuit Firmware and Diagnostic Utility Page Using Lputilnt Utility/NT Viewing HBA Parameters Main menu screen Performing HBA Firmware Maintenance Using the Lputilnt Utility/NT Firmware maintenance screen Upgrading HBA Firmware Deleting or Activating Firmware Image Downloading PCI Configuration Files Enabling or Disabling Boot Bios Modifying Driver Parameters Windows NT Registry Modifying the Driver Parameters Drive Parameters Parameter Parameter Description QueueDepth = n QueueTarget = n Drive Parameters AlPA Addresses Page Boot Bios System Requirements RA8000 or ESA12000 Boot Setup Auto-Configure OptionDisk In-line Exerciser Boot Bios Defining a Fibre Channel Drive as Boot Drive Enabling Boot Bios Creating an MS-DOS Boot Diskette Designating a Fibre Channel Boot Drive on Your Computer PageUp key Formatting the Fibre Channel Drive on Your Computer Enabling HBA Boot Bios on a Fibre Channel Hard DriveEnabling the Boot Bios PurposePage Installing Windows NT Page Regulatory Compliance Notices FCC Compliance Information Statement Model LP8000-F1 1 XPage Reference Manual Statements for Class B Equipment Federal Communications Commission NoticePage Glossary Page Glossary Page Glossary Page Index Show ADAPTER/-SET AdapterPage Index Page