Compaq LP8000-F1 manual Current Private Loop Device Mapping Bus # Target# Lun#

								Troubleshooting 4-11
Table 4-5
Current Private Loop Device Mapping continued
Bus #		Target#		Lun#	*AL_PA	*SEL_ID	**AL_PA		**SEL_ID
0	0-31		0-7		None	None	None		None
	27		0-7		0x36	0x62	0xB9		0x1B
	28		0-7		0x37	0x61	0xB6		0x1C
	29		0-7		0x3A	0x60	0xB5		0x1D
	30		0-7		0x3C	0x5F	0xB4		0x1E
	31		0-7		None	None	None		None
2***	0		0-7		0x43	0x5E	0xB3		0x1F
	1		0-7		0x45	0x5D	0xB2		0x20
	2		0-7		0x46	0x5C	0xB1		0x21
	3		0-7		0x47	0x5B	0xAE		0x22
	4		0-7		0x49	0x5A	0xAD		0x23
	5		0-7		0x4A	0x59	0xAC		0x24
	6		0-7		0x4B	0x58	0xAB		0x25
	7		0-7		0x4C	0x57	0xAA		0x26
	8		0-7		0x4D	0x56	0xA9		0x27
	9		0-7		0x4E	0x55	0xA7		0x28
	10		0-7		0x51	0x54	0xA6		0x29
	11		0-7		0x52	0x53	0xA5		0x2A
	12		0-7		0x53	0x52	0xA3		0x2B
	13		0-7		0x54	0x51	0x9F		0x2C
	14		0-7		0x55	0x50	0x9E		0x2D

*Use this translation if registry ScanDown = 0 (default)

**Use this translation if registry ScanDown = 1

***If MapBus0=1;, then device addressing starts with Bus #0, not #1

continued