Chapter 6
Using LPUTILNT Utility/NT
Introduction
The
(LPUTILNT.EXE) is an executable file located in the platform specific directory of the supplied software kit. Run the utility from the CD or copy and run it from your local hard drive.
NOTE: The LPUTILNT Utility/NT requires that the SCSI Miniport driver be installed and connected to at least one drive before it can operate properly or the registry parameter Simulate Device=1 be set.
The LPUTILNT Utility/NT is a Windows
■View HBA parameters
■Perform HBA firmware maintenance
■Download PCI configuration files (CFL)
■Modify driver parameters in the Windows NT registry
These parameters have been set by the Original Equipment Manufacturer (OEM) setup file provided in the software kit. The fibre channel setup file, run as part of the platform kit configuration, will also modify them. The resulting parameter setting has been modified to provide the optimal setting for the supported configurations.
