3.Press the F5 key immediately when the message appears to go to the Emulex BIOS Utility.
NOTE: Press the F5 key within five seconds of the displayed message to invoke the Boot
BIOS utility.
The Main menu screen appears showing a list of HBAs.
Host Bus Adapter BIOS Utility
Host Bus Adapters in the System:
1. ALPA: 18 | PCI BUS #: 00 | PCI DEVICE #: 10 |
2. ALPA: 01 | PCI BUS #: 00 | PCI DEVICE #: 0E |
Enter a selection. |
|
|
Enter <x> to Exit. |
|
|
4.Select the HBA by entering the appropriate number.
Any fibre channel drive attached to the HBA can be designated as the boot device.
Adapter 1: | ALPA: 18 | PCI BUS#: 00 | PCI DEVICE #: 10 |
1.Configure legacy private loop.
2.Configure boot devices.
3.Enable or disable BIOS on the adapter.
4.Change default ALPA of this device.
5.Changed Extended Link Service Timer (+ Advanced Option +).
6.Change FC Link Timer (+ Advanced Option +).
7.Change PLOGI Retry Timer (+ Advanced Option +).
8.Topology Selections (+ Advanced Option +).
Enter a Selection:
Enter <x> to Exit | <F6> to Default Values | <PageUp> to previous menu |
5.Type 8 to select a Topology Selection. Enter a selection and then press the PageUp key.
6.Type 2 to select Configure Boot Devices:
a.Select a boot entry
b.Enter a selection
c.Select the desired boot device. Enter a selection and then press the
