Firmware and Diagnostic Utility 5-9

5.Run iso9660:[utility]lp8ldr.exe – d dkd400 – p 2

Where – d = CD-ROM Device (at the SRM prompt type “ show dev” to display the value for your systems CD-ROM)

-p = the PCI bus number where the HBAs are located. If you choose to download the firmware, all HBAs on the PCI bus specified by the – P parameter will be programmed with the version of firmware contained in the LP8ldr.exe file.

For AS8200 systems with HBAs installed on multiple PCI busses, it is necessary to run the LP8ldr Utility once for each PCI bus that has an HBA to be upgraded. Therefore if your system has two HBAs the utility will be run twice. The – P parameter must be set to the new PCI bus number each time the utility is run.

Page 57
Image 57
Compaq LP8000-F1 manual Firmware and Diagnostic Utility