Compaq FTAM Responder Diagnostic Messages

Access-Related Diagnostic Messages

5005

FADU does not exist

Cause. The responder received a read or erase request for an empty FTAM-2 relative file.

Effect. In the case of a read, the responder cancels the service. In the case of an erase, the responder issues a negative erase confirmation.

Recovery. This is an information-only diagnositic message. Nothing happened.

5008

FADU not available for writing

Cause. A write request has been sent to a directory file (NBS-9).

Effect. The responder cancels the service, and the association is in a data-transfer idle state.

Recovery. The application or FTAM user should issue a cancel response. Do not retry; you cannot write to an NBS-9 file.

5011

FADU cannot be inserted

Cause. The responder received an open request with a processing mode of insert, and the requested access on the select service did not include insert, or the processing mode of insert is not allowed for the document type selected.

Effect. The responder rejects the request.

Recovery. The application or FTAM user should either open the file with a processing mode compatible with the services selected, or reselect the file so that it will allow FADU insertion.

5012

FADU cannot be replaced

Cause. The responder received an open request with a processing mode of replace, and the requested access on the select service did not include replace; or the processing mode of replace is not allowed for the document type selected.

Effect. The responder rejects the request.

Recovery. The application or FTAM user should either open the file with a processing mode compatible with the services selected, or reselect the file so that it will allow FADUs to be replaced.

OSI/FTAM Responder Manual425199-001

A-20

Page 88
Image 88
Compaq OSI/APLMGR D43, OSI/FTAM D43 manual 5005, 5008, 5011, 5012