Compaq OSI/FTAM D43, OSI/APLMGR D43 manual Access-Related Diagnostic Messages, 4003, 4005, 4006

Compaq FTAM Responder Diagnostic Messages Access-Related Diagnostic Messages

4003

Attribute not supported

Cause. Either a read-attribute request including the private attributes was issued, or an attempt was made to change an attribute that cannot be changed. Compaq FTAM does not support private attributes.

Effect. The service fails.

Recovery. No recovery is possible in the case of the read-attribute service. The Compaq FTAM responder does not support private attributes.

In the case of the change-attribute service, the application or FTAM user should restrict requests for change to the following attributes: filename, future-filesize, and access- control.

4005

Bad attribute value

Cause. The responder has received a change-attribute request with an invalid attribute value, or the file name was invalid for the Guardian 90 operating system.

Effect. The service fails.

Effect. The application or FTAM user should retry the service with a valid attribute value.

4006

Attribute partially supported

Cause. The responder received a change-attribute request that includes the storage- account attribute. The Compaq FTAM responder only partially supports this attribute.

Effect. This is an information-only diagnostic message. The request is completed. Recovery. No action is required.

Access-Related Diagnostic Messages

Table A-8 displays the diagnostic error identifiers that can occur during the execution of file-type or processing-mode requests.

OSI/FTAM Responder Manual—425199-001

A-17