Compaq FTAM Responder Diagnostic Messages |
2015
Initiator identity unacceptable
Cause. The
Effect. The association is not established. The responder generates the password- failure event (event number 20).
Recovery. Either the application or FTAM user should retry with a valid initiator identity, or the Compaq problem solver should configure the responder to have a default user ID/password. Change the VFS profile for the responder to define a DEFUSER attribute. Refer to the ALTER PROFILE command description in the SCF Reference Manual for FTAM and APLMGR.
2016
Context management refused
Cause. The remote initiator has set the
Effect. This is an
2018
Contents type list cut by responder
Cause. The responder detected one or more inconsistent or unsupported presentation contexts in the
Effect. This message is a warning. The responder disregards the contents types that it does not support or are not valid and retains those that are. The association is established with a partial
Recovery. The application or FTAM user should investigate the resulting list to determine if needed contents types are still included. If not, interoperability of the two FTAM implementations is limited and might prevent you from using FTAM to accomplish your purpose. The responder supports only the
2020
Invalid filestore password
Cause. The password on the initialize request is invalid, or an invalid default password is configured for the Compaq responder.
