SAFETY TIPS AND MAINTENANCE
SAFETY TIPS
Precautions for the camera:
•Do not attempt to modify this camera in any way. This may cause a fire, electric shock or severe damage to the camera.
•Do not use the flash in close proximity to people or animals.
•When taking photographs, never point the lens of the camera directly into very strong light.
•Please do not use this product in close proximity to flammable or explosive gases as this could increase the risk of explosion.
•For safety reasons keep this product and accessories out of reach of children or animals to prevent accidents.
•Do not swallow batteries or small camera accessories.
•Keep the camera away from water and other liquids, and never let it get wet. Do not use outdoors when it is raining or snowing.
•Should any form of liquid enter the camera, do not use it. Switch the camera off, and then remove the batteries. Do not continue to use the camera as this may cause a fire or electric shock.
•Do not insert or drop metallic or inflammable foreign objects into the camera through access points e.g. card slot and battery chamber. This may cause a fire or electric shock.
•Do not operate this camera with wet hands. This could pose a risk of electric shock.
•Under the environment with electrostatic discharge, the camera may malfunction and require the user to reset the camera.
•Under the environment with electrical fast transients (EFT), the camera may lose function and require user to reset the camera.
•Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
•Please avoid using the camera in high or low temperature. Operation temperature range 32˚F - 104˚F (0˚C - 40˚C).
•It is normal that the temperature of the camera body rises after being in use for a long period.
•Do not leave this camera in places subject to extremely high temperatures, such as in a sealed vehicle, under direct sunlight, or in other places with extreme variances in temperature. Exposure to extreme temperatures
may adversely affect the camera’s internal components and could cause a fire.
•Always use the camera and its accessories in a
•Allowing dust to accumulate in the camera over a long period of time is hazardous and in extreme circumstances may cause a fire. It is best to clean your camera prior to seasonal periods of high humidity.
Precautions for batteries:
•Use 2x AA batteries only.
•Dispose of the batteries in a manner that complies with applicable laws.
•Leakage, overheating, or burst batteries could result in fire or injury.
•Do not short circuit, heat or dispose of batteries in fire.
•Do not use old batteries with new ones, or mix brands of batteries.
•Ensure the batteries are positioned correctly with regard to polarity
•Batteries may lose power if kept inside the camera for a long time without using. Please remove the batteries while the camera is not in use.
•Do not use manganese batteries as they cannot supply sufficient power to support the camera’s operations. Batteries may not work normally under 32˚F (0˚C).
Precautions for SD Memory Cards:
•In the event of malfunction or damage, it is possible that data may be lost. Concord Camera is not responsible in any way for such data loss.
•Do not touch the terminals with hands or metal objects.
•Keep dust, water and foreign objects away from the terminal section.
•Avoid heat, liquid and direct sunlight when using and when storing.
•Do not open the battery/card cover or remove the SD Memory Card while data is being read or written.
•Do not dismantle or modify.
•The recorded data may be lost if the card is affected by strong static electricity, electrical shock, during card
En
70
