Concord Camera 4363z manual Using AUTO-FOCUS Lock, About Auto-Focus LED, About Auto-Focus Frame

En

TAKING A PICTURE

USING AUTO-FOCUS LOCK

This feature can be used to freeze the focus when the subject is not located in the center of the picture.

About Auto-Focus LED

When the shutter button is pressed half-way, the auto-focus feature will be activated and the Auto Focus (green) LED will display the status of the auto focus lock.

Steady

The subject is in focus.

About Auto-Focus Frame

A 3M 28/45

AWB

Blinking

The camera is setting the focus.

Auto-Focus Frame

AF Frame Color	Description
White	No focus.
Green	The subject(s) is in focus.

Using the focus lock:

A	3M	28/45
AWB
		28/45

fig. 1.1 fig. 1.2

A	3M	28/45
AWB
		28/45

fig. 1.3 fig. 1.4

1.Position the subject in the frame center. (fig.1.1)

2.Press the shutter button halfway down until the AF frame turns green and the green AF LED stops blinking. (fig.1.2)

3.Recompose your picture. (fig.1.3)

Keep the shutter pressed half-way while recomposing the picture.

4.Press the shutter button fully to capture the picture. (fig.1.4)

Note: The AF LED will continue blinking in the following conditions:

1.There are several subjects at different distances within the focus lock area. Recompose the picture by moving the camera slightly.

2.There is no color contrast. Recompose the picture with a subject that contains more color.

3.There is insufficient lighting. Increase the lighting in the surrounding area.

4.Please refer to P.24 to change AF assist light setting.

11