![](/images/new-backgrounds/1317750/31775087x1.webp)
CUSTOMIZING THE CAMERA SETTINGS
TURNING THE BEEP SOUND ON OR OFF
The camera provides an option to enable or disable the beep sound. The beep sound is ON by default. While the beep sound is on, the camera will beep in any of the following situations:
•When the camera is powered on.
•After an image is captured. (Note: The beep after image capture cannot be disabled.)
•When any button, except for the Power button, the zoom buttons and the camera mode slide switch button, is pressed.
En
SETUP
FORMAT
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN SELECT
How to activate/deactivate the beep sound:
1.In the Setup menu, press or
until Beep is highlighted.
2.Press to enter its submenu.
3.Press or
to highlight the desired selection.
4.Press the OK button to set.
BEEP
ON
OFF
RETURN OK SET
SETTING QUICK VIEW INTERVAL
The camera provides programmable Quick View duration, which is the time that the image is shown to the user immediately after a picture is taken.
Quick View | Description |
Off | No quick view, remain in live viewfinder. |
1 sec (Default) | Display image for 1 seconds then return to live viewfinder. |
3 sec | Display image for 3 seconds then return to live viewfinder. |
5 sec | Display image for 5 seconds then return to live viewfinder. |
|
|
How to select Quick View time phrase:
SETUP
FORMAT
DATE/TIME SETUP
DIGITAL ZOOM
BEEP
QUICK VIEW
RETURN SELECT
QUICK VIEW
Off
11 Sec
33 Sec
55 Sec
RETURN OK SET
1.In the Setup menu, press or
until Quick View is highlighted.
2.Press to enter its submenu.
3.Press or
to highlight the desired selection.
4.Press the OK button to set.
42