Concord Camera DV2020 manual Under Windows XP Operating System, E57

nUnder Windows XP Operating System

1 The Windows system will recognize the new

device and the message of driver search appears. Click ‘Next’ to continue installation.

2The “Windows Logo Testing” warning appears; click ‘Continue Anyway’ to proceed.

Note:

The computer will prompt you to install software for the camera,please follow on-screen instructions to complete installation.

3Click ‘Start > Control Panel > Performance and Maintenance > System > Hardware > Device Manager > Imaging Devices’ (if the panel is not already displaying the classic view, click ‘Switch to Classic View’) to check

if DV2020 appears under ‘Imaging Devices’.

If not, please re-install the driver or re-connect the camera. Note: Ensure that the camera is still connected to the computer while checking.

Note

1.For Windows 2000/ME/XP operating systems, if the Mode Dial is accidentally rotated from the SET position or the ( ) position to the other mode positions, the message about unsafe removal of device would pop up, close the mes sage by clicking the OK button from the message window, then rotate the Mode Dial back to the SET position or the ( ) position.

2.For Windows 2000 operating system, if the Mode Dial is accidentally rotated from the SET position or the ( ) position to the other mode positions, the error message of installation may pop up, close the message by clicking the Finish button from the message window, then rotate the Mode Dial back to the SET position or the ( ) position.

ENGLISH

E57