
2Hardware Installation
DSLAAU Manual
2.1 Before you start…
In MAC operating systems, you need to install the device drivers first (see next chapter) and then perform the hardware installation steps below.
· Hardware Installation
Install corega DSLAAU by following steps with the PC running:
1.Insert the rectangular end of a USB cable into the USB port of your PC.
2.Insert the square end of the USB cable into the USB port of corega
DSLAAU.
In Windows operating systems, corega DSLAAU will be detected and informational messages will be displayed on the PC’s screen. Proceed with the software installation in the next chapter, using the operating system appropriate to you.
7