REMOTE CONDENSER COIL AND FAN ASSEMBLY MAINTENANCE

CAUTION: Remote Condenser Coil and Fan Assembly connected to this Cooling Unit is equipped with a condenser coil that must be cleaned every 30-days. Allowing condenser coil to become clogged will cause refrigeration system to overheat which will automatically

shut refrigeration system down. After condenser coil has been cleaned, high-pressure sensing cutout switch (see Figure 5) must be pressed to restart refrigeration system. OPERATING COOLING UNIT IN THIS MANNER FOR PROLONGED PERIOD OF TIME COULD RESULT IN COMPRESSOR FAILURE.

CAUTION: Air filters on the Cooling Unit must be removed and cleaned every 30 days as instructed. Excessive accumulation of dust, lint, and grease on the air filters will restrict airflow through the Unit which will cause the refrigeration system to overheat.

The Cooling Unit cabinet is equipped with air intake and exhaust filters which allow air to circulate through the cabinet to cool the compressor. The air filter must be cleaned every 30 days. Excessive accumulation of dust, lint, and grease on filters will restrict air flow through the Unit. Air filter may be removed and washed out with detergent solution or may be vacuumed. Area around Cooling Unit must be kept free of obstructions at all times for proper air circulation throughout the Unit.

CHECKING ICE WATER BATH

(see Figure 5)

Note: Some Cooling Units are equipped with a water tank water level float control. A gurgle heard from the Cooling Unit indicates water level in water tank is low. This indicates the water level float control is not operating properly and must be replaced.

A gurgle heard from Cooling Unit indicates water level in water tank is low and more water should be added to the tank for maximum product cooling. Ice water bath and ice bank should be checked for cleanliness and water tank coils should be checked for excessive mineral deposit build-up as follows:

1.Disconnect electrical power from Cooling Unit at disconnect switch.

2.Remove two screws securing Cooling Unit top cover, then remove cover.

3.Using flashlight, inspect ice water bath and ice bank for cleanliness, ice water bath should be clear and ice bank free of foreign particles.

4.If cleaning of water tank is necessary, refer to CHANGING ICE WATER BATH in this section.

5.Fill water tank with clean water until water starts flowing from water tank overflow hose. USE LOW MINERAL CONTENT WATER WHERE A LOCAL WATER PROBLEM EXISTS.

6.Install Cooling Unit top cover and secure with two screws.

7.Restore electrical power to Cooling Unit at disconnect switch.

CHANGING ICE WATER BATH

(see Figure 5)

1.Disconnect electrical power from Cooling Unit at disconnect switch.

2.Remove two screws securing Cooling Unit top cover, then remove cover.

300614000

18

Page 21 Page 23
Page 22
Image 22
Cornelius 10, 000 PLUS installation manual Remote Condenser Coil and FAN Assembly Maintenance, Changing ICE Water Bath
Page 21 Page 23

000 PLUS, 10 specifications

Cornelius 10,000 PLUS is a pioneering innovation in the beverage dispensing industry, designed to cater to the evolving needs of commercial establishments. This advanced system combines state-of-the-art technology with user-friendly features, making it a standout choice for restaurants, cafes, and bars aiming to enhance their beverage service.

One of the main features of the Cornelius 10,000 PLUS is its impressive capacity. With the ability to dispense a wide variety of beverages, including soft drinks, cocktails, and craft beers, the system supports a large volume of service, perfect for high-demand environments. The modular design allows for easy expansion, enabling businesses to add additional flavors or beverages as needed without major overhauls.

The technology behind the Cornelius 10,000 PLUS is equally impressive. It utilizes advanced cooling technology to ensure that beverages are served at the optimal temperature, enhancing the customer experience. The integrated touchless dispensing mechanism minimizes waste and ensures a hygienic experience, addressing growing concerns about cleanliness in food service environments. This technology also improves speed, allowing staff to serve customers more efficiently.

Another key characteristic of the Cornelius 10,000 PLUS is its digital integration capabilities. The system can be connected to a central management platform that tracks sales, inventory levels, and maintenance needs in real-time. This allows operators to optimize their beverage offerings based on customer preferences and reduces downtime through proactive maintenance alerts.

In addition to its performance features, the Cornelius 10,000 PLUS is designed with sustainability in mind. The system employs energy-efficient practices, reducing its environmental footprint while lowering operational costs. The materials used in construction are durable yet eco-friendly, ensuring longevity and less waste.

Overall, the Cornelius 10,000 PLUS stands out as an essential tool for any business looking to elevate its beverage service. With its combination of high capacity, cutting-edge technology, and sustainability features, it not only meets the demands of today’s fast-paced service environments but also positions establishments for future growth and success.
Top Page Image Contents