Crestron electronic IPAC-GL1, GLPS-SW Green Light Power Switching, Up to 210 switched circuits

Green Light Power Switching Crestron Commercial Lighting Design Guide

IPAC-GL1Integrated Professional Automation Computer for Green Light Power Switching

Wall mount lighting control processor

Crestron 2-Series control engine

Easy system programming via LCD front panel

7 programmable buttons with LED feedback

Customizable backlit button labels

CEC Title 24 listed

Astronomical time clock

Occupancy sensing and daylight harvesting

2 RS-232, 4 digital/analog input, & 4 relay control ports

Cresnet and 10/100 Ethernet communications

Onboard e-Control®Web server

RoomView® and SNMP remote management

SSL (Secure Sockets Layer) network protection

Extensively programmable via PC software

3-gang wall-mountable

Available in white or black

The Crestron IPAC is a 2-Series control processor designed for wall mount installation. Its front panel controls and LCD display deliver a user-friendly interface for out-of-the-box system setup. Built-in Ethernet, Cresnet, RS-232, relay, and sensor inputs provide direct connectivity for interfacing with all kinds of devices, controls, and networks. The onboard e- Control® Web server allows for complete integration as part of a facility-wide managed control network.

Out-of-the-Box Lighting Control—The GL1 version of IPAC comes preconfigured for use as the central control processor for a Green Light Power Switching system. Right out of the box, the IPAC-GL1 affords easy setup and programming for a complete switching system consisting of:

Up to 210 switched circuits

16 keypads and 2 touchpanels

30 occupancy sensors and photocells

500 time clock events

Keypads with as many as 12 buttons each can be programmed easily to control lighting loads and zones. As well, the seven function buttons on the front panel of the IPAC-GL1 may also be programmed for lighting control or a variety of other common functions. Custom backlit labeling of these buttons is facilitated using an assortment of pre- printed labels or Crestron Engraver software.

Lights can be programmed to turn on and off automatically using the built-in astronomical time clock feature. Lighting events may be programmed to occur at specific times or at an offset from sunrise or sunset. Occupancy sensors and photocells may also be implemented to enable automatic on/off lighting control based on room occupancy and ambient light levels.

Custom programmability—with additional custom programming, the IPAC-GL1 can support virtually any functionality imaginable. It works seamlessly with the entire line of Crestron touchpanels, wireless remotes, lighting dimmers, shade controllers, thermostats, and more. It can also interface with third-party devices and systems such as security and access controls, surveillance cameras, and HVAC for a fully integrated solution. Contact Crestron Sales Support Services for more information.

The IPAC-GL1 is designed to be mounted in a standard

3-gang electrical box independent of the lighting panels, allowing it to be installed wherever it is most advantageous for the project.

Doc.4775A 26